Lanberg © 2015-2020
17
EN
2.1.1. Table of components
Component
Supplied quantity
Component symbol
M6*12 Phillips screw
< 21 U: 8x
>= 21 U: 12x
A
M5*10 Self-tapping Phillips screw
12x
B
M6*12 Phillips Screw with M6 Cage Nut
< 13 U: 10x
>= 13 U: 20x
C
Wall-mount rail
1x
D
Level with magnet
1x
E
Keychain with double keys
3x
F
1x
G
Front frame with grounding pins
1x
H
Cover with break-out cable entry panel and 2 central holes for 12x12 fans
2x
I
1st cabinet side frame with the attached door, 2 latches (except 4U) and a grounding pin
1x
J
2nd cabinet side frame with the attached door, 2 latches (except 4U) and a grounding pin
1x
K
Cabinet rear cover
1x
L
Numbered vertical mounting rails
4x
M
2.1.2. Unpacking components
1. Place the front frame
[H]
(in which the top/bottom
cover and accessories are placed) in the middle
with the door facing the ground.
2. Place the string bag with accessories inside on the
left side. Take the keys
[F]
from it.
3. Rotate the front frame [H] so that the door is
facing you. Next, open the lock. Put both covers
[I]
on the right side.
4. Remove the glass door
[G]
from the front frame
[H] while pressing inwards 2 hinges (L-shaped).
Place the element in the middle on the left (under
the accessories).
