Lamy Rheology FIRST PLUS LR, Руководство пользователя

Страница: 8 / 32

8
1.5. INSTALLATION
Your viscometer should be installed in a clean, vibration-free environment. Even if no level is
necessary, choose a stable and flat table.
This installation notice concern only viscometer without any temperature device. If you have it,
please refer to specific notice of temperature unit for installation.
After unpacking all accessories from the box (or case if it is supplied), you must first screw the
rod to the base with screw and key provided.
Then make sure to insert the white Delrin cylinder and set it to the lowest position. Then place
the stop ring on the stainless steel rod. Then place arm on rod, respecting the direction as
described below. The arm is equipped with two buttons and a handle. You can change them
for your convenience if you are left-handed.
You can then put the viscometer on the arm, taking care not to touch the motor shaft or
temperature sensor (if your device has one). Align the measuring head correctly and secure it
with the screw provided.