12
Then you can click
“Start” to start your measurement. While your measurement, you will see a
torque gage. Please try to not be closed to the upper and lower limit. Please increase speed
or take a bigger measuring system if you are close to the lower limit. Please decrease speed
or choose smaller measuring system if torque reading is close to the upper limit. If you change
speed or spindle, you will need to make a new zero adjustment.
Picture below show how should be the closer position regarding lower limit.
Then your measurement is finished, you will get this windows below. You will find all data you
need and get possibility to save them into internal memory or to print it (if printer is connected,
see section 2.2.5.10)
. If you choose “Save”, viscometer will ask you to give a name of your
measurement. You will have after possibility to read it later (see section 2.2.3.).
Torque gage
Содержание FIRST PLUS LR
Страница 1: ...1 USING MANUAL FIRST PLUS LR...