Lamtec F200K2 IR-1, Руководство по безопасности

Страница: 8 / 24

7
2 General Safety Instructions
2 General Safety Instructions
2.1 Intended Use
The device is developed and approved for appropriate and intended use. If the device is used
improperly, the protection of personnel and plant is not ensured.
The corresponding manuals or chapters for each particular stage of the product life cycle must
be regarded in addition to this Safety Manual see chapter
1.1 Purpose
. Ignoring these instruc-
tions will void any warranty and absolve the manufacturer from any liability.
2.2 Safety Functions
The independent compact flame scanner F200K is suitable for flame detection of burners and
combustion systems for gaseous, liquid or solid fuels with permanent operation.
WARNING!
The type approval lapses in the event of modifications to the unit. The unit's inputs and outputs
must be wired according to the specifications in the instruction manual only.
DANGER!
The appendix Hints and requirements for installation, commissioning, operation and
verification" must be considered properly.
2.3 Safe State
The safe state is achieved when the flame signal contact is opened (Flame OFF) and in a
de-energized condition.
2.4 Scope of Application
The F200K flame scanner fulfil
•
technical requirements according to
DIN EN 61508:2011
, part 2
for SIL 3
• the requirements to be used as single device for SIF according to
DIN EN 61511-1:2005-05
up to
SIL 3
.
• the requirements to be used as single device for safety related control functions (SRCF)
according to
EN ISO 13849-1:2006
up to performance level
PL
e (CAT. 3)
and
• the applicable requirements according to
DIN EN 746-2:2011-02
for flame detection in
industrial thermo processing equipment.