Lampoassa ELI 60-90, Руководство пользователя

Страница: 9 / 62

9
USER MANUAL
100% GEOTHERMAL HEAT
Use the button in the bottom left corner to return to the home screen. Use the arrow button in the bottom right corner to return to previous screen. For
instructions screen, press the ‘i’ button in the top right corner. In case of operation faults, an alarm button is displayed on the top bar.
The rate of the function Room temperature adjustment can be increased
1...7 times by compensation. The compensation function is included
under additional room temperature settings, which can be accessed by
pressing the button at the bottom centre of the screen. In case of compen-
sation value 7, the adjustment is seven times faster than in case of value
1. Large compensation values can cause room temperature fluctuations.
3.4.3. Domestic water boost
The storage tank can be set to function at maximum thermal output in order
to meet transient needs, for example, if the need for domestic hot water
increases temporarily. For domestic water boost, press the Max button.
Return to the normal mode by pressing the Eco button. Choose the domes-
tic water boost period (1...24 h) using the ‘plus’ and ‘minus’ buttons.
3.4.4. Home/Away function
The home/away function shortcut can be used to save energy when the
residents are away for a long holiday trip, for example. The function
Away changes the heat distribution circuit and storage tank temperature
settings until the set date and time; after that, the original set values are
automatically restored (i.e., the normal mode Home is reactivated).
The system’s normal mode is Home . To activate the Away function, press
the button Away and set the date and time of your return for restoring the
mode Home (default value: 24 h). The changes in room and storage tank
temperatures can also be programmed. In order to ensure restoring of the
normal temperatures by the time of your return from the holiday trip, the
day preceding the actual return date, for example, could be programmed
as the return date.
Set the desired heat distribution circuit temperature adjustment under
Room temperature adjustment; values between -10...+10 °C are possi-
ble. Set the desired storage tank temperature adjustment value under
Storage tank temperature adjustment. This setting influences domestic
water temperature. Values between -10...+10 °C are possible. If any of
these temperatures is not to be changed, keep 0 °C as its value. When
leaving for a holiday trip, for example, both of the values might be low-
ered by approx. 5 degrees by setting -5 °C as the room/storage tempera-
ture adjustment value.