Lampoassa ELI 60-90, Руководство пользователя

Страница: 18 / 62

18
100% GEOTHERMAL HEAT
INSTALLATION
4. INSTALLATION WORKS
4.1. Before installation
Pipe assemblies for the installation of the Lämpöässä system may only
be installed by qualified and trained persons. The equipment must be
installed in compliance with instructions provided; after performance of
installation works, the installation checklist must be reviewed in order to
minimise potential errors. The manufacturer shall not be responsible for
any equipment defects or related expenses caused through installation
faults.
Check that:
• all the necessary hoses and sensors have been delivered
• the ground source heat pump has been correctly fitted
• the connections on top of the geothermal heat pump are intact
• the fuse size is correct for the master fuse and the ground source
heat pump (see technical specifications)
• the ground circuit collection piping and supply piping have been
installed properly
4.1.1. Transport
The Lämpöässä geothermal heat pump must always be transported in a
vertical position. If tilting the equipment is unavoidable, for example, to
pass through a doorway, the maximum tilting angle allowed is 45°. In
other cases, the machine’s compressor unit must be detached during
tilting. The equipment may be moved from beneath using a fork lift, for
example. Do not go underneath the equipment while it is being lifted!
A transportation platform has been fas-
tened on both sides of the ground source
heat pump using screws. The ground
source heat pump’s accessory package
includes adjustable feet to be screwed into
the unit bottom (see picture). After that,
remove the wooden platform elements and
their fixation screws (4 pc). To remove the
platform, lift the equipment by a fork lift,
for example.
4.1.2. Ground source heat pump installation area
We recommend that the Lämpöässä ground source heat pump be
installed in a warm room with floor drain. During installation, when filling
the ground circuit, some water/ethanol or water/glycol mixture may be
splashed onto the floor. The chosen area does not have to be fireproof.
Approx. 50 cm of installation space should be reserved above the
equipment.
The floor must be able to withstand the weight of the ground source heat
pump carrying a full storage tank. The floor must also be sufficiently
even, because the ground source heat pump must be installed as level as
possible. Final adjustments can be made using the adjustable feet under-
neath the equipment.
4.1.3. Removing the packaging
Remove the plastic wrapping and corner padding from around the prod-
uct. Check that the pump has not suffered any transportation damage. If
the heat pump is found to be damaged, the transport company must be
immediately notified. We recommend photographing the damages.
Also check the contents of the delivery immediately. The Lämpöässä ESi/
EMi/ELi-series accessory package includes the following components:
• valve motor
• 4-way valve (GSHP with separate storage tank with intermediate
floor) OR 3-way valve (GSHP with separate storage tank)
• heat distribution pump
• outdoor sensor
• heating circuit temp. sensor
• storage tank temp. sensor
(2 pc.)
• adjustable foot (4 pc.)
• filling group
• filling bottle (packaged
inside the product)
• safety valve
If some of the accessories specified
in the order are not included in the
delivery, notify the equipment
dealer within five days.
The plastic roof of the product is
removed by lifting it from the edges.