SECTION 5 –
OPERATION AND INSTRUCTIONS
5-1. SETTING UP
•
Plug the optic device into the holder
(3)
•
Insert lights into the holder with a maximum of
9W
•
Insert the lamp’s connective plug
(4)
into the
socket
(5)
on the back of the welding device and
screw it tightly by carefully turning to the right.
(as tight as possible by hand)
•
Plug the optic device’s mains plug
(6)
into the
correct mains plug socket with ~115V (110V) /
50-60 Hz .
•
Keep a minimum 15 cm distance between the
light and the workpiece and/or the welding
table.
•
Turn the mains switch
(1)
to “ON”
•
During a self-test right after switching on the
welding device, the view protection filter
(2)
will
quickly turn dark and then light. Test the device
in this manner each time prior to beginning your
work, to ensure that the view protection filter
functions perfectly. If necessary, start the self-
test gain by switching off the device; switch it on
again after several seconds of waiting.
WARNING!
Before welding, always check that the PUK Optic Device
functions properly. If the arc
welding filter does not switch from light to dark, it must be changed immediately.
5-2. DESCRIPTION OF THE OPERATING ELEMENTS
(Fig. 1)
2
1
MAINS CENTRAL SWITCH (1)
ARC WELDING FILTER (2)
Содержание PUK 111
Страница 2: ......
