LaMotte Tracer Total Chlorine PockeTester 1740 Скачать руководство пользователя страница 14

14

0

EXPANDING YOUR TRACER

Interchangeable electrodes are available to convert the Total Chlorine TRACER 

to a pH TRACER or an ORP TRACER.
Remember to ask for instructions and appropriate reagent or buffer tablets when 

ordering pH or ORP electrodes.

pH TRACER Electrode, 0.00-14.00 pH

Code 1733

The pH TRACER Electrode is used with pH 4.0, 7.0

and 10.0 buffers. Order using the following codes:
pH 4.0 Mini Buffer Tablets (100)

Code 3983A-J

pH 7.0 Mini Buffer Tablets (100)

Code 3984A-J

pH 10.0 Mini Buffer Tablets (100)

Code 3985A-J

ORP TRACER Electrode,±999 mV

Code 1734

The ORP TRACER Electrode (code1734) requires

an initial soaking in a pH 4.0 buffer solution. Order

pH 4.0 Mini Buffer Tablets/100 pack (Code 3893A-J).

WARRANTY

The TRACER PocketTester is specif cally calibrated for use with the TRACER 

TC1 Tablets (Code 7044A). Use with other reagent systems will void the warranty 

and may damage the meter.
LaMotte Company warrants this instrument to be free of defects in parts and 

workmanship for 1 year from the date of shipment and the probe to be free of 

defects in parts and workmanship for 6 months from the date of shipment. If it 

should become necessary to return the instrument for service during or beyond 

the warranty period, contact our Technical Service Department 

The sender is responsible for shipping charges, freight, insurance and proper 

packaging to prevent damage in transit. This warranty does not apply to defects 

resulting from action of the user such as misuse, improper wiring, operation 

outside of specif  cation, improper maintenance or repair, or 

unauthorized 

modif  cation. LaMotte Company specif  cally disclaims any implied warranties 

or merchantability or f  tness for a speci f  c purpose and will not be liable for 

any direct, indirect, incidental or consequential damages. LaMotte Company’s 

total liability is limited to repair or replacement of the product. The warranty 

set forth above is inclusive and no other warranty, whether written or oral, is 

expressed or implied. 

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

 TestEquipmentDepot.com 

Содержание Tracer Total Chlorine PockeTester 1740















Отзывы: