17
Instructions and Installation
Using the pyrolitic cleaning cycle
:
1. Rotate the function selector
to the position “
”. On the
display, appears the indication
“ ECO” or “SUP”. The pre-set time
is 90 min, this can be varied
from 90 min (Eco mode) to
120 min (Sup mode) via the
programmer (setting button “+”
or “-”). If the oven is very dirty,
it is recommended to increase
the time to 120 min, if the oven
is moderately dirty reduce the
cleaning cycle time to 90 min.
2. It is possible to defer the start
time of the pyroclean cycle by
changing the END time via the
programmer.
3. After few minutes, when
the oven reaches a high
temperature, the door locks
automatically. The pyroclean
cycle can be stopped at any
time by turning the function
selector back to “0” (the word
OFF will be displayed for
3 seconds).
4. Once the pyroclean cycle is
finished, the pyrolysis will switch
off automatically. On the
display appears the indication
“END” until the door is locked
then “0--n”.
5. You can turn the function
selector back to “0” but if the
temperature is still high, the
“0--n” indication appears to
inform that the door is locked.
e increased to 120 min, while if
the oven is only a slightly dirty,
reduce the cleaning cycle to
90 min.
Содержание LAM3710
Страница 2: ......
