Lamona LAM3700, Руководство пользователя

Страница: 16 / 39

If the Pyrolysis function
operates, the door locks
automatically. A message
comes on in the display when
you touch a sensor field.
1. Activate the appliance.
2. Touch and at the same time until
the display shows a message.
To deactivate the Child Lock function
repeat step 2.
Function Lock
This function prevents an accidental change
of the heating function. You can activate it
only when the appliance operates.
1. Activate the appliance.
2. Set a heating function or setting.
3. Press again and again until the
display shows: Function Lock.
4. Press to confirm.
If the Pyrolysis function
operates, the door is locked and
the symbol of a key comes on in
the display.
To deactivate the function, press . The
display shows a message. Press again
and then
to confirm.
When you deactivate the
appliance, the function also
deactivates.
Set + Go
The function lets you set a heating function
(or a programme) and use it later with one
press of a sensor field.
1. Activate the appliance.
2. Set a heating function.
3. Press again and again until the
display shows: Duration.
4. Set the time.
5. Press again and again until the
display shows: Set + Go.
6. Press to confirm.
Press a sensor field (except for ) to start
the function: Set + Go. The set heating
function starts.
When the heating function ends, an
acoustic signal sounds.
• Function Lock is on when the
heating function operates.
• The menu: Basic Settings
lets you activate and
deactivate the function: Set +
Go.
Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some time if
a heating function operates and you do not
change any settings.
Temperature (°C) Switch-off time
(h)
30 - 115 12.5
120 - 195 8.5
200 - 245 5.5
250 - maximum 1.5
The Automatic switch-off does
not work with the functions:
Light, End Time, Duration.
Brightness of the display
There are two modes of display brightness:
• Night brightness - when the appliance is
deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a sensor field during the
night brightness (apart from ON /
OFF), the display goes back to the
day brightness mode for the next 10
seconds.
– if the appliance is deactivated and
you set the function: Minute Minder.
16