Lamona LAM3675, Инструкции и установка

Страница: 33 / 40

Before installation
The product must only be installed by suitably
The product must be installed in accordance
with all local regulations.
Prior to installation, visually check the product
for any damage/defects. Do not install if any issues
are found.
Damaged products may cause risks to your own
safety.
Installation
The appliance is intended for installation in
Howdens kitchen cabinets.
Surfaces, synthetic laminates and adhesives
used must be heat resistant.
If there is a drawer beneath the oven, a shelf
must be installed between oven and drawer.
The following installation drawings are
representational and may not match exactly
with your appliance.
560mm
560mm
600mm
(min)**
555mm
567mm
555mm
585mm
567mm
20 mm
20 mm
550mm
min depth
550mm
min depth
*
*
*
585mm
594mm
595mm
595mm
590mm
(min)
Tower Installation
** The oven may need to be positioned
lower in the cabinet to fit with some hobs
Built under installation
594mm
www.howdens.com Page _ 33
Note: Remove carcass rear panel
to assist with oven ventilation
* A minimum of 150mm² ventilation
gap is required as illustrated
(35mm x 500mm cut-out)
500mm
35mm