Lamona LAM3675, Инструкции и установка

Страница: 16 / 40

5. Touch to set an operating function.
6. If you want to change the temperature,
touch once to reach the temperature display.
symbol will flash on the display.
7. Touch to set the desired temperature.
When the desired value is reached, touch
to confirm temperature.
8. For Booster (Rapid Heating), touch for
approximately 3 seconds until appears on
the display. will appear and the booster
setting will be activated.
When the booster setting is made, the oven
operates in maximum power to reach the set
temperature. When the temperature is reached
will disappear. Booster setting is active for the
functions during which is displayed when
is touched for a long time. Booster can only be
activated for cooking operations performed in
the single large section.
9. Touch once for coking time. will flash
the display.
10. Touch to set the cooking time and
confirm the setting by touching . Once the
time is set, and will remain on the display.
11. Put your dish into the oven and close
the door.
12. If cooking function, temperature and time
values are suitable, touch for 2 seconds to
start cooking. Cooking will start and will
appear on the display.
this temperature until the end of the set cooking
time. Each grade of the inner temperature symbol
will be lit as inner temperature reaches to the set
temperature. Additional active heaters and
recommended tray position appear in the Function
display.
All segments of the inner oven temperature symbol
will turn on when the oven reaches the set
temperature.
13. After the cooking is completed, and will
flash on the display and an alarm signal will sound.
14. To stop the alarm signal, just touch any key.
The oven will switch off automatically.
15. If you want the oven to continue operating,
press for 2 seconds. The oven will continue
cooking for an indefinite period of time.
If you want to cancel the setting after performing
the cooking setting by adjusting the cooking time,
you will need to reset the cooking time. You can
also switch off the oven by touching if you want.
Setting the end of cooking time to a later time;
You can ensure that the oven runs and turns off
automatically by setting temperature and operating
function specific to your meal, the cooking time and
end of cooking to a later time, manually controlling
without setting the cooking time.
Oven returns to stand-by display after it is powered
on for the first time and the current time is set.
Only the current time appears on the display.
1. Remove the middle section plate from the oven.
Only after the middle section plate is removed the
oven timer will work in single large section cooking
setting.
2. Switch on the oven touching the key for
two seconds.
3. When the oven is switched on, the first function
peculiar to the single large section cooking will be
displayed.
4. Touch to enter the display for setting the
operating function. The relevant function number
will flash on the display.
Your oven will readily start operating in the
selected function and will increase the inner
temperature to the set temperature. It maintains
Page _ 16
User manual LAM3675
Exclusive to Howdens Joinery.co