Lamona LAM1902, Руководство пользователя

Страница: 20 / 28

Problem Possible cause Remedy
The highest heat setting is
set. The highest heat setting has
the same power as the func-
tion.
The heat setting changes be-
tween two levels. Power management oper-
ates. Refer to "Daily use".
The sensor fields become
hot. The cookware is too large or
you put it too near to the con-
trols. Put large cookware on the
rear zones if possible.
There is no sound when you
touch the panel sensor fields. The sounds are deactivated. Activate the sounds. Refer to
"Daily use".
comes on.
Child Safety Device or Lock
operates. Refer to "Daily use".
comes on.
There is no cookware on the
zone. Put cookware on the zone.
The cookware is unsuitable. Use suitable cookware. Refer
to "Hints and tips".
The diameter of the bottom of
the cookware is too small for
the zone. Use cookware with correct di-
mensions. Refer to "Techni-
cal data".
and a number come on.
There is an error in the hob. Deactivate the hob and acti-
vate it again after 30 sec-
onds. If comes on again,
disconnect the hob from the
electrical supply. After 30
seconds, connect the hob
again. If the problem contin-
ues, speak to an Authorised
Service Centre.
You can hear a constant
beep noise. The electrical connection is
incorrect. Disconnect the hob from the
electrical supply. Ask a quali-
fied electrician to check the
installation.
If you cannot find a solution...
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating plate. Give also three digit letter code for the
glass ceramic (it is in the corner of the glass surface) and an error message that comes on.
Make sure, you operated the hob correctly. If not the servicing by a service technician or
dealer will not be free of charge, also during the warranty period. The instructions about the
Service Centre and conditions of guarantee are in the guarantee booklet.
20