Lamona LAM1902, Руководство пользователя

Страница: 10 / 28

OptiHeat Control (3 step Residual heat indicator)
WARNING! / / There is a risk of burns from residual heat. The
indicators show the level of the residual heat for the cooking zones you are
currently using. The indicators may also come on for the neighbouring cooking
zones even if you are not using them.
The induction cooking zones produce the heat necessary for the cooking process directly
in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware.
Daily use
WARNING! Refer to Safety chapters.
Activating and deactivating
Touch for 1 second to activate or deactivate the hob.
Automatic Switch Off
The function deactivates the hob automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you activate the hob,
• you spill something or put something on the control panel for more than 10 seconds (a
pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the
object or clean the control panel.
• the hob gets too hot (e.g. when a saucepan boils dry). Let the cooking zone cool down
before you use the hob again.
• you use incorrect cookware. The symbol comes on and the cooking zone deactivates
automatically after 2 minutes.
• you do not deactivate a cooking zone or change the heat setting. After some time
comes on and the hob deactivates.
The relation between the heat setting and the time after which the hob deactivates:
Heat setting The hob deactivates after
, 1 - 3
6 hours
4 - 7 5 hours
8 - 9 4 hours
10 - 14 1.5 hour
The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat setting or move your finger along the control bar
until you reach the correct heat setting.
10