Lamona LAM1004, Руководство по установке пользователя

Страница: 7 / 16

_ 07
User manual LAM1004
Flame failure device
A
In case of flame failures of the burners for any
reason, the flame failure sensor ‘A’ will cut off the
gas flow after a few seconds.
If this occurs, depress and turn the control knob to
the ignition position clockwise direction and wait for
ignition.
Keep the knob at pressed position for 3-5 seconds
after you see the flame around the burner.
Repeat the sequence of operations if the flame
does not continue.
After you release the knob, if the ignition does not
continue repeat the same process by keeping the
knob pressed for 15 seconds.
DANGER Risk of fire in case of unburned gas!
Do not press the knob for longer than 15 seconds if
there was no ignition. Wait for one minute and then
repeat the ignition process.