_ 11
User manual LAM1004
Place the hob in the aperture, checking the hob is
covering the worktop along all four sides. Set the
front edge of the appliance parallel with the front of
the worktop.
Secure the hob to the worktop by means of
the brackets provided, taking the thickness of
the worktop into account. Your appliance will
be supplied and installed using the following
installation method.
The two brackets are secured directly into the base
of the hob in appropriate positions as shown.
30mm
Hob
Worktop
Screw
40mm
Hob
Worktop
Screw
20mm
Hob
Worktop
Screw
Worktop
25mm
oven or partition
Hob
5mm
Installation above an oven
If the appliance is installed with an oven
underneath, please leave at least 25mm of
ventilation, unless otherwise stated in your oven
installation guidelines.
40mm
Hob
Worktop
Screw
50mm
Hob
Worktop
Screw
30mm
Hob
Worktop
Screw
Worktop
25mm
oven or partition
Hob
5mm
If the installation is not above an oven and the
underside of the hob is accessible, a wooden shield
is required to be installed at least 15mm below the
underside of the hob unit.
15 min.
Connect to the electricity Supply
This appliance must be earthed.
The hob must be installed by a competent
electrician, using a suitable double pole control unit,
with 3mm minimum contact separation at all poles.
Ensure that you route all mains electrical
cables well away from any adjacent heat source,
such as the base of the hob or oven / grill surface.
The wires are connected to the terminal
block as follows:-
L= Brown
N = Blue
Earth = Green/Yellow.
terminal cover is secured in position.
Installation
L
N
Содержание LAM1004
Страница 1: ...User Installation Guide LAM1004 Gas Domino Hob ...
Страница 15: ..._ 15 User manual LAM1004 Notes ...