4/EN
•
Do not operate the product
if it is defective or has any
visible damage.
•
Ensure that the product
function knobs are switched
off after every use.
Electrical safety
•
If the product has a failure,
it should not be operated
unless it is repaired by an
Authorised Service Agent.
There is the risk of electric
shock!
•
Only connect the product to
a grounded outlet/line with
the voltage and protection
as specified in the
“Technical specifications”.
Have the grounding
installation made by a
qualified electrician while
using the product with or
without a transformer. Our
company shall not be liable
for any problems arising due
to the product not being
earthed in accordance with
the local regulations.
•
Never wash the product by
spreading or pouring water
onto it! There is the risk of
electric shock!
•
The product must be
disconnected during
installation, maintenance,
cleaning and repairing
procedures.
•
If the power connection
cable for the product is
damaged, it must be
replaced by the
manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard.
•
Only use the connection
cable specified in the
“Technical specifications”.
•
The appliance must be
installed so that it can be
completely disconnected
from the mains supply. The
separation must be
provided by a switch built
into the fixed electrical
installation, according to
construction regulations.
•
Rear surface of the oven
gets hot when it is in use.
Make sure that the
electrical connection does
not contact the rear surface;
otherwise, connections can
get damaged.
•
Do not trap the mains cable
between the oven door and
frame and do not route it
over hot surfaces. Otherwise,
cable insulation may melt
and cause fire as a result of
short circuit.
