31/EN
Replacing the oven lamp
DANGER:
Before replacing the oven lamp,
make sure that the product is
disconnected from mains and
cooled down in order to avoid the
risk of an electrical shock.
Hot surfaces may cause burns!
The oven lamp is a special electric
light bulb that can resist up to
300 °C. See
Technical
specifications, page 11
for details.
Oven lamps can be obtained from
Authorised Service Agents.
Position of lamp might vary from the
figure.
The lamp used in this appliance is
not suitable for household room
illumination. The intended purpose
of this lamp is to assist the user to
see foodstuffs.
The lamps used in this appliance
have to withstand extreme physical
conditions such as temperatures
above 50 °C.
If your oven is equipped with a round
lamp:
1. Disconnect the product from mains.
2. Turn the glass cover counter
clockwise to remove it.
3. If your oven lamp is of type (A) shown
in the figure below, remove it by
rotating as shown and replace it. If it
is of type (B), pull and remove it as
shown in the figure and replace it.
4. Install the glass cover.
