Before Processing Laminate
There are two types of laminate film including
roll type
and
pack type
.
This product uses
cold roll film
type.
Ȅ
Pack type
and
hot roll film
cannot be used.
Thickness (
)
Thickness of the laminate film is selected according to the use.
Thickness of the cold roll film used by this product ranges from 20
to 300
.
Size of Branch Pipe
(Inner Diameter)
Size of installable paper tube differs according to the laminate structure.
This product uses a 3-inch (about 77 mm) branch pipe.
Type of Roll Film
Hot roll film
Apply heat to melt glue and attach the film.
Cold film
Parting paper (release paper) is attached on the surface applied with glue.
Release the film with the Re-winding device and compress with the roller for use.
#DQWV.COKPCVG(KNO
2TGECWVKQPUHQT*CPFNKPI.COKPCVG(KNO
Ÿ
Do not place the laminate film in places with high temperature and humidity.
Ÿ
When lamination is not being done, store the film on the exclusive film shelf or in a box.
Ÿ
Use film appropriate for the laminator.
Ÿ
If a problem is found in the film before use, do not use and contact the store. Reckless use may result in
failure of the laminator.
