5
Perform laminate processing.
1 :
Use the handle to adjust pressure (gap) according to thickness of processing material.
2 :
Adjust to the wanted speed using
SPEED
ഀ
button (speed can be adjusted during rotation of the laminate
roller) and press
RUN/STOP
ഀ
button to rotate the laminate roller.
ͤ
Here, the re-winding device for release paper automatically rotates. The re-winding device is controlled
by switch. (Refer to the above for switch operation method)
3 :
Insert the script towards the laminate roller for laminate processing.
4 :
Cut the processing material using cutter after processing.
5 :
After completion of all processing works, use the handle to lift the laminate roller and cover with a cloth
for storage.
Paper tube for re-winding release paper
Release paper
Under-film
Laminate film
Paper tube for product
Re-winding
Position of Pressure Lever
1 mm pressure is the optimal state for
cold processing in general.
Change pressure applied according to
necessity.
Panel processing is based on the position
of lever with thickness -2mm of panel
thickness.
Pressure of level seen
from the right side
Pressure increases as lever is put
down
Pressure decreases as
lever is lifted
Gap11mm
Gap8mm
Gap5mm
Gap3mm
Pressure1mm
Pressure3mm
Pressure5mm
Gap1mm
