Lami Corporation Leon13DX, Руководство пользователя

Страница: 4 / 20

Precautions for u se
&
Warning
�
To remove the plug from the receptacle, hold the plug housing.
Do not use other power ratings than that specified.
No multiple connections from a single receptacle are permissible. Make sure that the power plug is inserted to
the deepest position.
Electric shock or fire may otherwise occur. To handle a power cord, fol low the precautions
shown below
.
�

Do not modify power c ords .

Do not subject the c ord to heavy loads.

Avoid excessive bend. Twist. Or pull.

Avoid placing the power c ord near heating elements or apparatuses.
�
* If the power c ord fails. Contact your dealer.
Clean the power plug periodically. Remove the power plug from the recept acle and clean the root part of
and between the electrodes (blades).
Do not place flammables on the equipment. Do not drop the equipment.
� Avoid high temperature or humid, ill-ventilated, or dusty environment.
@
No dismantling or modification permissible.
Do not use the equipment when it is abnormal e.g. smoking or sme
lling . The equipment may
disconnect the power plug. Contact the seller or our company. For reason of safety, no repair by the
customer is permissible.
&caution
sure that the power connection is already removed.
�
For long disuse. Remove the power plug from the receptacle.
®
Do not use wet hand to remove or insert the plug.
0
Before power connection, ground connection should be made. To remove the ground make
Do not in stall or store the equipment in such a place that can be accessed by children.
0
The
Avoid
equipment
unstable
may
(shaking o
otherwise
r
fa
inclined)
l I or tu
floor.
mble down, leading to injury.
Do not ride on or place a heavy material on the equipment.
During the machine's operation or your action for inserting a film, your accessories such as
�
necktie and necklace or hair may be caught in the rol I er s assembly, leading to exposing you to
0
deformation of the rubber rol I er s at the contact part.
great danger.
Glue or other contaminants on the surface of the laminate rol I
er s should be removed. Wipe with a wel I-
squeezed, neutral detergent soaked cloth.
* Do not use solvent (benzene). thinner, brush. etc.
When not in use, keep the upper rol I er of the laminate rol I er assembly at the raised position. Leaving
the pair of upper and lower roll er s in contact with each other may lead to the
Avoid direct su nlight .
The r oller s are made of rubber and may otherwise be degraded quickly. When not in use, cover the
equipment to prevent it from being directly exposed to the sun or fluorescent I ight.
�
To move the equipment, turn off the power switch and remove the power plug from the receptacle.
03
�
Do not use damaged power c ords.
� Do not leave metallic things, flammables, or liquid in the equipment.
�
otherwise cause electric shock or fire to occur. Immediately turn off the power switch and
Leon13DX