Lami Corporation Leon13DX, Руководство пользователя

Страница: 14 / 20

Lamination
Operating steps
Lamination process should use the following steps.
Preparation for the e quipment
1. Turn on the power switch.
2. Set the roll er heating temperature.
3. Start heating. Check that the roll er surface reaches the target temperature.
Set the laminate speed
Film Thickness
Temperature
Speed
21 2
°
F
6-7
3 mil
Thickness of material
Thin (about 20 lb.: e. g. copy paper)
Medi um (about
3 2 lb. : e. g. catalog) 21 2
°
F
6-7
Thick (about 6 0 lb. : e. g. food menu)
250
°
F
3-5
Thin (about 20 lb. : e. g. copy paper)
21 2
°
F
5-6
5 mil Medi um (about 3 2 lb. : e. g. catalogue) 230
°
F
3-5
Thick (about 6 0 lb. : e. g. food menu) 250
°
F
2-4
Thin (about 20 lb. : e.g. copy paper) 230
°
F
3-4
7 mil Medium (about 3 2 lb.: e.g. catalogue)
265
°
F
4-5
(about 6 0 lb. : e. g. food menu)
2 8 5
°
F
3
Thick
Thin
(about 20 lb. : e. g. copy paper) 250
°
F
3-4
10 mil
2 8 5
°
F
4-5
2 8 5
°
F 2
This table is for reference only. The actual setting of these parameters should be determine d
case by case depending on the material to be laminated.
To determine setting th e temperature and speed parameters appropriate for the material to
be laminate d . S ee following pages.
Preparation for material to be laminated
1. Check the material size.
2. Select laminate film sheets appropriate for the material.
3. Insert the material between the laminate film sheets.
Lamination
Make sure you test the process then proceed with lamination.
1. The sealed side should lead.
2. Since the laminated material is hot, please be careful when handling.
3. Please lie laminated materials on a flat surface until the heat cools down.
End of operation
Ending the operation by immediately turning off the power switch may lead to the failure or damage
of the laminate roll er s. To avoid this, cool down the laminate roll er s using the (COLD) button and then
switch off the power.
13
Medium (about 3 2 lb.: e.g. catalogue)
(about 6 0 lb. : e. g. food menu)
Thick
Leon13DX