29
Intermediate programming
Entering the second level programming menu
The installation's operational parameters are set in the second level menu. To access to this
menu, simultaneously press and hold buttons
for 5 seconds. Access to the menu is
protected by a password, which by default is 1 1 1 1. The intermediate programming menu
contains the parameters listed in the table below. The parameters are displayed consecutively.
Press the button
to switch from one parameter to the next. The regeneration icon flashes
while the parameters are being changed. All the changes are saved when the END message
appears. Parameters that are changed during incomplete programming processes are therefore
not saved.
Quick programming.
Only program the values indicated in the selection column
Parameter
Options
Definition
Selection
SH: 0
0: Time clock regeneration based on the day of the
week
SH: 1
1: Time/mixed volume regeneration (delayed vol.)
SH: 2
2: Immediate volumetric regeneration
SH: 3
3: Time clock regeneration at hourly intervals
SH: 4
4: Time clock regeneration at daily intervals
U L
L: Litres
ECO GREEN
U M3
M: Cubic metres
DOUBLE SVT &
DOUBLE PLUS
SVT
Ub:On
On: "Proportional brine draw & dry tub" function
active
Ub:Off
On: "Proportional brining" function deactivated
1: 999
Inlet hardness setting in °f
0: (H-1)
Outlet hardness setting in °f
0.1:99.9
Exchange capacity setting (m3 x °f)
5.5
