lamber S280, Руководство пользователя

Страница: 5 / 13

6
ENGLISH
First Section - FOR THE USER
WORKING AND USE
The glasswashing machine S280 can wash up to 20÷30 baskets every hour.
The machine protection degree is IP21, therefore it should not be washed with direct high pressure jet water;
The objects to be washed should be correctly arranged for a good washing-up result;
We suggest to descale dishes, from time to time, in order to remove calcareous and/or starchy sediments
by soaking it in suitable solutions suggested by your cleansing agent supplier.
If you need to buy new dishes remember the following: Dishes and cups: preference must be given to
china or non-porous pottery articles, with smooth surface. Glasses: choose a glass suitable to be washed
in dish-washing machines. Surfaces must be smooth and bottoms the least concave possible.
OPERATION BEFORE WORKING
B
EFORE STARTING THE WORKING OPERATION BE
SURE THAT
:
- the cock is open;
- the filter and the overflow are in
their housings;
- the wash arm and the rinse arm are free to
pivot;
- rinse aid dispenser containers are loaded.
T
HEN PROCEED
:
A
- Open the door and put into the tank,
possibly over the pump-filter, about 30 gr.
of non-lathering detergent in powder. If the
machine is provided with an automatic dosing
device, control the detergent that is in its
container.
B
- Place the dishes in the basket minding to
previously remove all solid waste and fat.
Do not overload baskets, dishes must not be
placed one upon the other, water must have the
way to run on each part of the same.
C
- Turn the machine on by wall switch and
push the switch "A" on the ON position.
The green lamp "G" becomes lighted and the
machine loads automatically (with closed Door).
When the level has been reached, the lamp
"E"
lights up .
D
- Put the basket into the machine.
Close the door and push the button "B" .
The green lamp
"F" will become lighted and the
cycle start for 2 minutes, including besides the
washing, a five seconds stop and the rinsing of
fifteen seconds with clean water at 82°÷90°C,
will start. At the end of the cycle the lamp "F"
will go out.
Note
: The rinse start only when the
temperature of the water is 90°C.
Bear in mind that the opening of the door
interrupts the cycle and therefore the machine
at any moment. Pratically, the opening of the
tank works as an emergency device.
E
- Take away the basket and repeat the
operation "D" .
Every 10 cycles add about 20 gr. of detergent.
ACHIEVEMENTS
Any deficiency in the washing process is
apparent when dirty residuals are visible. Any
halos might be caused by an insufficient rinsing:
in this case, check that the rinsing jets are clean
and there is a sufficient pressure in the water
distribution network.
In the case that residuals are present, check
that:
• the washing jets are clean
• there is detergent
• the positions of the objects in the rack are
correct.
REGENERATING
(for machines with Water-softener)
If the glasswasher is equipped with a Water-
softener it is possible to
Regenerate the water
(water cleaning).
Every evening, after MAINTENANCE
operations, lift the overflow out of the tank,
close the door and push the switch
"A" on the
OFF position.