lamber LP8/L-dy, Инструкция по эксплуатации

Страница: 39 / 48

dos. Rinsing dos.Rinsing
To confirm
Dosing time (0÷100%) for the times
dispenser of rinsing see
the table
on the manual
dos. Discaling dos.discaling
To confirm
Dosing time (0÷100%) for the times Dosing time (0÷100%) for the times
Discaling see
the table
on the manual
Without Drain pump this parameter
is not
Stand By YES
To confirm
Stand By YES
To confirm
NO
If you turn the machine on Stand By
stops after 1 hour and sets the values
of rinse temperature on 60°C.
The display will show the word ECONOMY
Soft-start YES
To confirm
NO NO
Regeneration YES
To confirm
(Water softener) NO
Filling time Drain time
To confirm
Filling time Drain time
To confirm
regeneration (30÷90")
Cycle number Number of cycles
To confirm
regeneration (0÷15") With "0"
the regenerating is
the regenerating is
enabled
Economy thermostat YES
To confirm
NO
S Thermocontrol YES
To confirm
NO
SERVICE Number of cycles
To confirm
Number of cycles (0÷99999) With "0"
the SERVICE is
enabled
enabled
At the end of the programming operations
Exit the machine turns off. Press push-button "A"
for 1 second to turn the machine on