lamber LP6-ek, Инструкция по эксплуатации

Страница: 14 / 43

14
CLEANING AND PREVENTIVE
MAINTENANCE
- IMPORTANT : Before carrying out the
cleaning and maintenance operations,
disconnect the equipment from the
mains power supply:
- Follow the directions on the
maitenance in this guide;
- Wear protective clothing and gloves
when challenged elements are impregned
with clearing solution;
- High temperatures can be reached
inside the machine (90°C). After power
supply has been removed, wait until the
machine has reached room temperature,
before working on it.
- Never leave tools, parts or other loose
material in or on the machine;
- Chek that there are no rusting foreign
bodies, because of the material “stainless
steel” could begin to rust. Rust particles can
come from non- stainless steel dishes or
damaged wire baskets.
-
Do not wash the machine and the
area surrounding it with fire hydrants, steam
jets of high-pressure cleaners;
-
When clearing the floor be careful not
to saturate the base of the machine, in order
to avoid a prolonged stagnation of water;
-
To clean the inside of the machine,
use a brush or a soft cloth;
-
To clean the machine do not use
abrasive cleaners;
- BEFORE starting machine or cycle,
after any maintenance or repair work,
make sure all protectives are correctly
installed;
Please pay attention to the opening and
closing of the door of the machine. Do not use the
machine if you are wearing clothes/items that could
get entangles in the dishwasher parts. As they can
limit personnel’s regular moving ability!
DAY MAINTENANCE
Attention. Before carrying out cleaning
the inside of the machine, make sure that there
are no foreign objects that could damage the
rusty steel inside the tank. The eventual rust
particles could come from non-stainless steel
dishes, from baskets or damaged water pipes
not rust-proof.
-
Disconnect the machine with
pushbutton "A";
- Lift the overflow pipe and let the
water drain out of the tank;
- Wash thoroughly the tank and the
filters
housing to remove all
impurities;
- Take the filters and clean it under
running water;
- Re-assemble the overflow pipe and
the
filters in their housings;
- Check and clean the washing and the
rinsing jets;
-
Clean the filter of the steam condenser
that is placed in the upper part of the
hood;
(only for machines with steam
condenser!)
-
Clean the outer surface of the
machine by using a wet sponge; don't
use water jets because, beside being
dangerous they could damage the
electrical parts; don't use abrasive
detergents;
- When the machine is to remain idle
for a
long time, drain all the water
from the boiler (the drain
plug is located on the lower
side of the boiler) and from the
electropump. Also leave the wash
tank
open.
NEVER WASH THE EXTERNAL PART
OF THE MACHINE WITH A WATER JET