lamber LP6-dy, Инструкция по эксплуатации, Страница: 35 / 52

DETERGENT DISPENSER AND
LIMESCALE :
PROGRAMMING
For programming see section CONFIGURATION
USER TECHNICAL-PROGRAMMING The control
acts on the percentage values from 0% to 100%
with the logic time/pause according to the values
shown in the following table:
0% always OFF
10% 0,5s ON and 4,5s OFF
20% 1,0s ON and 4,0s OFF
30% 1,5s ON and 3,5s OFF
40% 2,0s ON and 3,0s OFF
50% 2,5s ON and 2,5s OFF
60% 3,0s ON and 2,0s OFF
70% 3,5s ON and 1,5s OFF
80% 4,0s ON and 1,0s OFF...
90% 4,5s ON and 0,5s OFF
100% always ON
If there is the detergent pump installed by
Lamber, data are as follows:
Capacity: 1cc/SEC=3,6 Lit/H
Voltage: 230/50-60Hz
MANUAL FILLING OF THE DISPENSERS
This function can be employed during the fist
installation of the dishwasher, or when the
product’s jerrycan is not filled quickly enough and
consequently the dispenser is completely empty.
During the setting, enter in the parameter
10%..20%..30%...100% that concerns the
dispenser that you want to fill manually. Pressing,
and keeping pressed the button START, the
dispenser will start working till when you will
release the button (the message DISPENSER
FILLING will be displayed).
DETERGENT DISPENSER
INSTALLATION AND CONNECTION OF THE
DETERGENT DISPENSER
CAUTION : Observe the safety notes and
dosage data for the use of chemicals. During
the use of the chemical substance wear
protective clothing, gloves and glasses. Do not
mix different cleaning products.
If the machine is not fitted as standard, must be
accompanied by detergent dispensers oft he
suppliers of those products.
Entering DETERGENT WASHING LIQUID must
be carried out using the hole provided on the
front of the washing tank (see photo below)
The mean concentration of the liquid detergent
should be 2-4 g/liter. In any case it is however
necessary that the detergent manufacturer
regulates in an appropriate dosage depending on
the characteristics of the installation.
For the installation of the dispenser inside the
machine, you can use the free support next to the
rinse dispenser installed as standard on the
dishwasher (see next photo)
The suction tube of liquid detergent has to be
passed through the opening spot on the right side
of the machine (see next photo)