LAMAR LS 70, Руководство пользователя

Страница: 10 / 24

A
SSEMBLY
I
NSTRUCTION
P
AGE
9
A
SSEMBLY
S
TAGE
# 2
Add Weight Plates, Guide Rods, & Leg Extension Arm
Assembly Hardware Required:
#29 Threaded Shaft Qty. 1 #47 Flat Head Allen Screw Qty. 2
#30 Sleeve Qty. 1 #48 Flat Washer Qty. 2
#36 Button Head Allen Screw Qty. 1 #50 Flat Washer Qty. 2
#44 Button Head Allen Screw Qty. 2 #54 Nylon Nut Qty. 1
Assembly Description:
A) Align the
Guide Rods
(#19) with the rear mounting bracket of the
Base Frame
(#1) and secure the rods in place
using 2-
Button Head Allen Screws
(#44) and 2-
Flat Washers
(#50). (Reference Figure #2)
B) Slide a
Bumper
(#59) onto each
Guide Rod
(#19) and carefully slide each one of the
Weight Plates
(#63) over the
guide rods. (Reference Figure #2 & #3)
Assembly Note:
Before adding the weight plates, make sure you have
positioned the gym in the desired usage location.
C) Once all the weight plates have been loaded, carefully slide the
Selector / Top Plate Assembly
(#26) over the guide
rods and insert the
Selector Pin
(#51 not shown) into one of the middle plate positions. This will help stabilize the
weight stack during the ongoing assembly process.
D) Slide
Threaded Shaft
(#29) through the upper pivot-boss of the
Leg Extension Arm
(#2). Align the upper pivot
bushing of the
Leg Extension Arm
with the mounting bracket of the
Base Frame
(#1) and secure the arm in place
using 2-
Flat Head Allen Screws
(#47). (Reference Figure #4)
E) Slide
Sleeve
(#30) through lower pivot-boss of the
Leg Extension Arm
(#2) and attach the
Roller Pad Pivot
(#11)
in place using 1-
Button Head Allen Screw
(#36), 2-
Flat Washers
(#48), and 1-
Nylon Nut
(#42). (Figure #4)
♦
Assembly Stage # 2 completed
50
59
44
19
36
47
2
48
29
11
48
54
30
26
1
Figure #3
Figure #2
Figure #4