7
FILLING THE WATER TANK
• For best results, always make sure there is plenty
of water in the tank when ironing, but do not fill the
tank beyond the ‘MAX’ level.
• Only use water in the water tank.
DO NOT
add
perfume, vinegar, chemically descaled water or any
other substances into the water tank.
• Always make sure the iron is switched off and
unplugged from the socket.
• Slide the steam control slider to the no steam
position. This is to prevent water leaking from the
soleplate onto your laundry.
• Open the water tank cover.
• Use the water jug to fill the tank with tap water, until the ‘MAX’ mark is reached. Never
fill the water tank level beyond the ‘MAX’ mark.
• Close the water tank cover and wipe any water off the iron.
ANTI-CALC SYSTEM
• There is a special resin filter inside the water tank, which softens the water and
prevents limescale build-up in the steamer panel. The resin filter is permanent and
does not need replacing.
•
PLEASE NOTE
: Use tap water only. Distilled and demineralized water makes the anti-
calc system ineffective by altering its physicochemical characteristics.
•
DO NOT
add perfume, vinegar, chemically descaled water or any other substances
into the water tank. Failure to comply with the above-mentioned regulations leads to
the loss of guarantee.
ANTI-DRIP SYSTEM
• The anti-drip system automatically stops water escaping from the soleplate when the
iron is too cold.
• When ironing fabrics at low temperatures, the soleplate may cool down to the point
where no more steam comes out, which could lead to drops of boiling water that can
leave marks or stains. In these cases, the anti-drip system automatically activates
to prevent vaporisation, so that you can iron the most delicate fabrics without risk of
spoiling or staining them.
• During use, it may make a clicking sound, especially during heat-up or while cooling
down. This is normal and indicates that the system is working correctly.
MAX level