6
USING YOUR DIGITAL STEAM IRON FOR THE FIRST TIME
• Unpack the iron, remove all the packaging materials.
• Unwind the power cord.
• Fill the iron with tap water, as described below in ‘Filling the Water Tank’.
• Stand the iron upright on its anti-slip heel. Make sure the steam slider is turned to
‘No Steam’ .
• Plug in and switch on at the socket. The iron will bleep once, the LED control panel will
be at the lowest setting and will flash until the iron has reached temperature then the
heat setting will stop flashing and there will be one bleep.
• The soleplate has reached temperature.
• When you switch on the iron for the first time you may notice a slight burning smell,
this is normal for a new appliance and will stop after a few uses.
• Increase the heat setting to the highest temperature, move the steam control slider to
the right of the iron ‘Maximum Steam’ .
• You will notice steam coming out of the soleplate.
• Some residue may remain inside the iron from manufacture, so iron an old cotton
cloth or tea towel for first use, do not use the iron on your laundry. Press the steam
shot and water spray buttons to run water through the iron.
INCREASING AND DECREASING THE HEAT SETTINGS
• To increase the heat setting, press the ‘+’ button to
increase through the settings.
• To decrease the heat setting, press the ‘-’ button to
decrease through the settings.
• Each time you press the increase or decrease
buttons there will be an audible bleep.
Increase
heat level
Decrease
heat level