manualshive.com logo in svg

Lake LM 26, Руководство по эксплуатации

Поделиться
Скачать
Lake LM 26 Скачать руководство пользователя страница 8

2 

   

Welcome

Lake LM Series Operation Manual Rev 1.3.5

2.2.3  Dante

™

 Audio Network

LM Series devices include Dante digital audio networking as standard. Utilizing the latest advances in 
Ethernet technology, Dante offers simplified system configuration and extremely low latency while deliver-
ing very high quality uncompressed digital audio across the Lake network. The Zen

™

 automatic configuration 

feature enables plug-and-play setup without third-party DHCP or DNS servers. Dante is compatible with 
high-bandwidth networks, allowing large numbers of audio channels to be distributed alongside control and 
analyzer data.

2.3  Additional Documentation

This document, the Lake LM Series Operation Manual, serves as the primary reference source for detailed 
information on the installation and operation of LM Series devices. It also provides detailed information on 
set-up and configuration using the front-panel interface.

If you intend to use the device as part of a networked system, or access features via the Lake Controller, 
please refer to the various supporting documents which can be located via these methods: 

 

▸

Start > Programs > Lake Controller > Documentation (after installing Lake Controller software)

 

▸

On the included installer CD-ROM / USB key, or via the downloaded software installer 

 

▸

Online at: http://labgruppen.com/products/documentation/

Содержание LM 26








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды