manualshive.com logo in svg

Lake LM 26, Руководство по эксплуатации

Поделиться
Скачать
Lake LM 26 Скачать руководство пользователя страница 11

Product Overview

5

    

Lake LM Series Operation Manual Rev 1.3.5

4.  Product Overview

This chapter provides an overview of key features and functionality. For further information please see 
chapters 5 to 9 of this Operation Manual.  

4.1  Front Panel Overview

Figure 4-1: LM Series Front Panel Overview

The front panel controls are clustered around a daylight readable LCD  , allowing adjustment and monitor-
ing of the majority parameters and meters. The two clusters of controls on either side of the LCD include 
three dedicated function buttons       , six dynamic function buttons with embedded LEDs     and a 
rotary data encoder  . To the right of these controls is a dynamic illuminated I/O divider   along with input 
and output   mute buttons and level meters.

 Handles

Two sturdy cast aluminium handles are integrated into the front panel. The handles should be used when 
carrying the device, and when fitting into or removing from a rack. Ensure that any door or removable rack 
front cover has sufficient depth to clear the handles.

 Standby

LM Series devices are powered on and placed into standby mode using the left-most button, or via the 
Lake Controller. Standby mode is not equivalent to turning the device off at the mains power.

All audio in and out of the processor is muted  when 

in Standby mode. Network communication remains 

active to allow the device to be turned on via the 

Lake Controller.    

Содержание LM 26








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды