Lake LM 26 Скачать руководство пользователя страница 24

Страница: 24 / 71

Front Panel Interface

Lake LM Series Operation Manual Rev 1.3.5

6.4 Meter Button

The front panel display has two main operating modes, Meter Mode (default) and Menu Mode. In normal
operation, the display will be in Meter Mode.

The following views are available in Meter Mode: Home View (default), Input View (Mesa Mode only) and
I/O Status View. Pressing the METER button

scrolls through these views. Pressing the METER button

when in Menu Mode will return the system to Meter Mode, with the Home View displayed. Please refer to
section 6.9 for further information.

6.5 Menu Button

Menu Mode is selected by pressing the MENU button . The screen displays the top level menu with
various submenu options. Press the button adjacent to the required submenu to select it.

Pressing the MENU button while in Menu Mode will display the previous menu level.

Menu Mode is used for processor configuration, or for editing a parameter. Please refer to section 6.10 for
further details.

6.6 Exit Button

In Menu Mode, pressing the EXIT button returns back one menu level. In Meter Mode, pressing EXIT
returns the display to the Home View.

6.7 Dynamic Buttons, Controls and LEDs

Figure 6-3: LCD with Dynamic Buttons, Controls and LEDs

Содержание LM 26








































































Результаты поиска

Содержание LM 26

Отзывы:

Бренды по названию

Популярные бренды

Lake LM 26, Руководство по эксплуатации

Результаты поиска

Содержание LM 26

Отзывы:

Бренды по названию

Популярные бренды