manualshive.com logo in svg

Lake LM 26, Руководство по эксплуатации

Поделиться
Скачать
Lake LM 26 Скачать руководство пользователя страница 41

Front Panel Interface

35

    

Lake LM Series Operation Manual Rev 1.3.5

      

This section of the screen displays the output routing configuration

    

 

Press this button to scroll through the available output destination types

    

 

Press this button to move the cursor to the left

    

 

Press this button to move the cursor to the right

      

Use the rotary encoder to toggle the selected routing point ON or OFF

Use the above function keys to navigate to the required audio source and output destination, then move the 
cursor to a routing point and adjust using the rotary encoder. 

 

▸

‘

X

’ identifies a connected routing point

 

▸

‘

O

’ identifies a currently unused and available routing point

 

▸

‘

-

’ identifies that routing is unavailable for this routing point, normally because another audio channel is 

already routed to the output.

All three states are shown in inverse video when they are selected by the cursor.

6.10.4  Frame Submenu

MENU > FRAME

Figure 6-21: Frame Menu

The Frame Menu provides information and options relating to the device as a physical unit. It is referred to 
as a Frame for consistency with Lake Controller terminology.

6.10.4.1 Frame Info

MENU > FRAME > FRAME INFO

Frame Info provides information about the device settings and configuration. All data in this front panel 
menu is read-only; some parameters are fixed, some can be changed only via the Lake Controller software.

Содержание LM 26








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды