Sentrius RG1xx
User Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/ramp
37
© Copyright 2017 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
10
FCC
AND
ISED
C
ANADA
R
EGULATORY
S
TATEMENTS
This product contains the RG191-M2 and the WB50NBT from Laird.
Model
US/FCC
CANADA/IC
RG191-M2
WB50NBT
SQG-1001
SQG-WB50NBT
3147A-1001
3147A-WB50NBT
10.1
Power Exposure Information
To comply with FCC RF exposure limits for general population/uncontrolled exposure, the antenna(s) used for
this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and
operating in conjunction with any other antenna or transmitter.
IMPORTANT NOTE:
If these conditions cannot be met (for certain configurations or co-location with another
transmitter), then the FCC and Industry Canada authorizations are no longer considered valid and the FCC ID
and IC Certification Number cannot be used on the final product. In these circumstances, the OEM integrator
is responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC and
Industry Canada authorization.
10.2
OEM Responsibilities
To comply with FCC and Industry Canada RF exposure limits for general population/uncontrolled exposure,
the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm
from all persons and operating in conjunction with any other antenna or transmitter, except in accordance
with FCC multi-transmitter product procedures.
WARNING
:
Changes or modifications not expressly approved by Laird could void the user’s authority to
operate the equipment.
10.2.1
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in an installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to correct the interference by one or more of the
following measures:
▪
Re-orient or relocate the receiving antenna
▪
Increase the separation between the equipment and the receiver
▪
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
▪
Consult the dealer or an experienced radio/TV technician for help.
10.2.2
FCC Warning
This device complies with part 15 of the FCC rules operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Содержание Sentrius RG1xx
Страница 1: ...A User Guide Sentrius RG1xx Version 2 1 ...
