Laird Sentrius RG1xx, Руководство пользователя

Страница: 18 / 39

Sentrius RG1xx
User Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/ramp 18
© Copyright 2018 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
7 L
O
R
A
C
ONNECTION
S
ETUP
The side panel for the LoRa Gateway allows selections for configuration and status of the LoRa network card.
The status of the LoRa Network is also displayed (
Figure 19 ).
Figure 19: LoRa connection setup page
The Gateway ID (also known as the gateway EUI), is used to uniquely identify the RG1xx gateway. It is
required when registering the gateway on a LoRa network server. The gateway EUI is also printed on the
bottom label of the gateway, with the label
M2 EUI .
Figure 20: Gateway label
7.1 Using Presets
The Sentrius RG1xx contains multiple preset configurations for connecting to a third-party server or as the
basis for a private network. These presets configure the forwarder and the channel plan.
To apply a preset configuration, follow these steps:
Click the LoRa tab in the main menu. The default page of the LoRa menu is the Presets page (also
accessible in the left side menu of the LoRa pages).
Select the preset from the drop down. Information about this preset is displayed in a panel to the right
(
Figure 21 ).
Click Apply to apply the preset configuration. After a few moments, a green confirmation appears on
the bottom of the page.
Note: The LoRa Region Code is
displayed here. Be sure
that the gateway you are
operating matches the
region in which you are
operating it.