Sentrius RG1xx
User Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/ramp
13
© Copyright 2018 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
5
LAN
C
ONNECTION
S
ETUP
The LAN menu allows selections for configuration and status of the IPv4/IPv6 wired network. The current
status of the IPv4 network is also displayed. To access this section, click
LAN
in the page menu.
5.1
IPv4 Configuration
The first page for configuring the Ethernet LAN connection is the IPv4 Configuration page. There are two basic
modes of operation
–
DHCP and Static. These are selected in the IP Address Acquisition Method drop-down
box (
Figure 10
). The gateway factory default setting is DHCP.
Figure 10: IPv4 Configuration page
▪
DHCP
–
When in DHCP mode, all settings are provided by the DHCP server. All configuration settings
(except IP Address Acquisition Method) are greyed out. IP values provided by DHCP are displayed but
cannot be changed.
▪
Static
–
When the IP Address Acquisition Method is set to static, all IP settings are fixed and saved in the
device. The external Gateway IP address is optional and may be left blank. DNS Server IP addresses are
also optional. Zero, one, or two DNS servers may be specified.
5.2
IPv6 Configuration
Select the IPv6 configuration by clicking the IPv6 menu item in the side menu of the LAN view (
Figure 10
). The
IPv6 configuration settings are shown below.
There are two fully-supported modes for IPv6 addressing:
▪
DHCP
–
In DHCP mode, all settings are provided through communication with an IPv6 server on the
network.
▪
Auto
–
In auto mode, you have the option of selecting the auto DHCP method (either stateless or
SLAAC). As of June 2017, IPv6 static mode is only partially supported. Please see the software release
notes for current information.
Содержание Sentrius RG1xx
Страница 1: ...A User Guide Sentrius RG1xx Version 2 1 ...