Laird BTM410 Скачать руководство пользователя страница 78 | Manualshive

Страница: 78 / 78

background image

BTM410/411

Bluetooth

®

AT Data Module

78

www.lairdtech.com

Laird Technologies

Innovative

Technology

for a

Connected

World

Laird Technologies is the world leader in the design and
manufacture of customized, performance-critical products for
wireless and other advanced electronics applications. Laird
Technologies partners with its customers to find solutions for
applications in various industries such as:

Network Equipment

Telecommunications

Data Communications

Automotive Electronics

Computers

Aerospace

Military

Medical Equipment

Consumer Electronics

Laird Technologies offers its customers unique
product solutions, dedication to research and
development, as well as a seamless network of
manufacturing and customer support facilities
across the globe.

LWS-UM-BTM410-411_v3.0_0413
Copyright © 2012 Laird Technologies, Inc. All rights reserved.
The information contained in this manual and the accompanying software programs are copyrighted and all rights are reserved by Laird Technologies, Inc. Laird
Technologies, Inc. reserves the right to make periodic modifications of this product without obligation to notify any person or entity of such revision. Copying,
duplicating, selling, or otherwise distributing any part of this product or accompanying documentation/software without the prior consent of an authorized
representative of Laird Technologies, Inc. is strictly prohibited.
All brands and product names in this publication are registered trademarks or trademarks of their respective holders.
This material is preliminary
Information furnished by Laird Technologies in this specification is believed to be accurate. Devices sold by Laird Technologies are covered by the warranty and
patent indemnification provisions appearing in its Terms of Sale only. Laird Technologies makes no warranty, express, statutory, and implied or by description,
regarding the information set forth herein. Laird Technologies reserves the right to change specifications at any time and without notice. Laird Technologies’
products are intended for use in normal commercial and industrial applications. Applications requiring unusual environmental requirements such as military,
medical life-support or life-sustaining equipment are specifically not recommended without additional testing for such application.
Limited Warranty, Disclaimer, Limitation of Liability

«
...
76
77
78

Содержание BTM410















































































Отзывы:

Нет отзывов

Похожие инструкции для BTM410

Бренд: Panasonic Страницы: 72

Бренд: Panasonic Страницы: 45

Бренд: Panasonic Страницы: 24

Бренд: Fancom Страницы: 31

Бренд: 3M Страницы: 90

Бренд: jbc Страницы: 44

Бренд: jbc Страницы: 8

Бренд: TCi Страницы: 9

FEBCO 860 Small Series

Бренд: Watts Страницы: 12

Бренд: Bardiani Valvole Страницы: 54

Бренд: Parker Страницы: 478

Бренд: iluminize Страницы: 2

Бренд: Aulisa Страницы: 32

J1000 CIMR-JC series

Бренд: YASKAWA Страницы: 26

Бренд: Yolink Страницы: 23

Бренд: Gateway Страницы: 2

Бренд: CALEFFI Страницы: 6

Бренд: Oriental motor Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды