BTM410/411
Bluetooth
®
AT Data Module
20
www.lairdtech.com
Laird Technologies
AT COMMAND SET
REFERENCE
AT COMMAND SET
REFERENCE
2.
AT+BTIV<devclass> { Inquire }
As per AT+BTI but the response comprises for all inquiry responses:
1. Bluetooth device address
2. Device class code
S register 330 is not referenced.
3.
AT+BTIN<devclass> { Inquire }
As per AT+BTI but the response comprises for all inquiry responses:
1. Bluetooth device address
2. Device class code
3. Friendly name
S register 330 is not referenced.
4.
AT+BTIR<devclass> { Inquire }
As per AT+BTI but the response comprises for all inquiry responses:
1. Bluetooth device address
2. Device class code
3. Friendly name
4. RSSI (receiver signal strength indicator)
S register 330 is not referenced.
5.
AT+BTIE<devclass> { Inquire }
As per AT+BTI but the response comprises for all inquiry responses:
1.
Bluetooth device address
2.
Device class code
3.
Friendly name
4.
RSSI (receiver signal strength indicator)
5.
Extended inquiry data
S register 330 is not referenced.
6.
AT+BTE=”<EIR-Data>” {Set up outgoing EIR Data}
This command sets up outgoing EIR (extended inquiry response) data.
Format: <EIR-Data> = printable ASCII character whenever possible, otherwise a 2 digit hexadecimal
with preceding ‘\’ presenting one byte. Please note that the given data is written to baseband as it
is (raw data) and no checks on the data format is performed. Hence, the user is responsible for
writing data that corresponds to the extended inquiry response data format as described in the
Bluetooth Specification Version 2.1 + EDR [1], vol3, Part C – Generic Access Profile, 8 Extended
Inquiry Response Data Format (page 1305 in the .pdf-file).
Response:
<cr,lf>OK<cr,lf>
Содержание BTM410
Страница 1: ...1 Version 3 0 ...