Laipac Technology Inc.
20 Mural Street, Unit 5, Richmond Hill Ontario L4B 1K3 Canada
Tel: 905-762-1228 | Fax: 905-763-1737 | E-mail:
|
http://www.laipac.com
9
2.4
Charging the Battery
Note: To extend the battery life, when user first time uses LOLA, it is requested that
he/she should not do battery charging until LOLA reminds user that battery is low
with red LED flashing every 5s on the position of GSM indicator.
To do battery charging, user should use USB cable to connect the AC-DC adaptor and
LOLA, as shown in the picture below. Then, plug the adaptor into a wall outlet.
How to speed up the battery charging process?
(1)
Power on LOLA and wait it to enter into its working mode
(2)
Connect LOLA with the charger and start to charging it
(3)
*Press “Power ON/OFF” button for a while, both GSM and GPS status indicator
will be turn off and user can feel a vibration generated by the internal vibrator. In
this case, LOLA has been forced to enter into its Fast-Charging-Mode.
*Note:
After action (3), if the GPS and GSM LEDs are still on, press and hold power a
second time for a while until it vibrates again. Both GPS and GSM LEDs should be
off by this point and the Lola will have entered its Fast-Charging-Mode.
Under Fast-Charging-Mode, the Phone LED will continue to be solid RED and the
white border will continue to be solid WHITE. Both Phone and Boarder will turn off
when battery is fully charged. The whole charging process may last 3 to 4 hours.
