Laipac Technology Inc.
20 Mural Street, Unit 5, Richmond Hill Ontario L4B 1K3 Canada
Tel: 905-762-1228 | Fax: 905-763-1737 | E-mail:
|
http://www.laipac.com
5
SOS Button:
It is being used to send SOS alert, pick up/hand up phone and checking unit’s status
Send SOS alert:
Press this button for over 3 seconds, if user can see the flashing generated
by SOS button back light LED, it means this SOS request has been
accepted and unit will activate its SOS alert action sequence, refer to
section xxx
Pick up phone:
When unit has incoming phone call, user can press this button to pick up the phone.
Hand up phone:
During or after the phone call, user can press this button to hand up the phone
Checking status: Press this button, user can hear beeping. It can show user the
working status of the major function part on this unit, such as GPS
and GSM, refer to section 9 below.
Reset LOLA
To reset LOLA, user should press both “Power” and “SOS” button for 2 or 3 seconds,
then, release them.
Note
1.
When LOLA is connected to computer to do configuration or firmware update,
user should follow the prompt information provided by utility software
2.
When LOLA is under its regular working status, only do this when it is necessary.
Otherwise, it can interrupt the GPS position data capturing and saving process and
may damage data saved inside of the internal memory
