Copyright © 2020 Laia · www.laiatech.com
All rights reserved
button to delete the selected device.
4. Keyboard connection and control device
4.1 Connection and control in ONVIF mode
Need to add manually
In ONVIF mode, the operation of adding a LAN device using the keyboard is as
follows:
1. Press the keyboard settings button.
2. Choose ADD DEVICE.
3.
Enter the IP, port, user name, password, and channel number of
the video conference camera.
4.
After the input is complete, return to the settings interface and
select INQUIRE DEVICES.
5.
Select the device you just added and press ENTER to connect the device.
Login successfully displayed XXX.XXX.XXX.XXX.
Note: Enter the keyboard in any input state for confirmation, the joystick to
the left is BACKSPACE or DELETE.
4.2 Connection and Control in IP VISCA Mode
Search is not supported in IP VISCA mode, only by manually adding devices.
1.
Manually add devices via the [IP] key.
2.
After adding the device, press the “INQUIRE” button to view the added
device, and the joystick “Up” and “Down”. View the saved device (the
joystick “Right” can view the port), press the “ENTER” button to select the
camera you want to control or use the [CAM] button to connect and control.
4.3 VISCA, control in PELCO mode
Just set the address code and baud rate to control, PELCO also needs
to set PELCO-D or PELCO-P protocol.
