Quick Installation Guide
Important Information
For more detailed information, please refer to the Help file in the Driver CD in the Help directory. The ways to display Help file are
as follows:
- After driver installation, please click the driver icon at the right-bottom in the Windows system tray. Click the Help button on the
left-bottom of the driver Configuration dialog box and the help file will pop up. Or
- Please see “Help\ Help.htm” in the Driver CD.
Hardware Installation
Front View of Back View of
USB Connector USB Connector
1.
Plug in the receiver connector into your available USB port on PC.
2.
Make sure the batteries of the keyboard and mouse are installed
correctly, please follow the polarity signs in the battery compartment.
Pairing Procedure
The wireless kit can operate out of the box immediately after you plug the
receiver USB connector into your PC USB port. If it can’t work, please follow
the steps below to process ID setting of the Wireless Kit.
The pairing/connect button is the LED light on the top of the receiver. The
LED shows the pairing or data reception status.
The ID-recognition function helps to protect against interference from other
RF products in the same environment.
Remember to pair ID when other RF
products affect your keyboard kit.
Mouse pairing procedure:
1. Press the pairing/connect button on the top of the receiver first.
Receiver LED indicator will blink slowly indicating it’s ready to receive
keyboard/mouse pairing information.
2.
Next, press the pairing/connect button on the bottom of the mouse
once.
Keyboard pairing procedure:
1.
Then press the pairing/connect button on the top of the receiver again.
2.
Press the pairing/connect button on the bottom of the keyboard.
Receiver LED indicator flashes 3 times rapidly as indication it’s paired with
this keyboard and mouse.
Note:
- Each procedure should be completed
within 60 seconds.
ID Button(LED)
- Make sure your PC is on and running when doing the pairing procedure.
- Every time you want to reset each one of the receiver, mouse or keyboard ID, you must follow the procedures above to
set all IDs again.
-
You don’t have to pair ID again after changing batteries. If it can’t work, please follow the steps above to process ID
setting of the wireless kit.
Driver Installation
USB Device Driver
The USB device driver is included in Windows operating system.
During initial installation of the USB device, the system will automatically detect a new hardware being added, and then bring up
"Add New Hardware Wizard" dialogue box. Please follow the Wizard's USB driver installation steps. Once this installation step is
completed the basic functions of the USB device will work under the operating system. The additional functions are provided only
after the KeyMaestro application is installed.
KeyMaestro Input Device Driver
1. Insert the CD labeled
"KeyMaestro Input Device Driver"
into your CD-ROM.
2. The CD will automatically run and bring up the Setup dialogue box.
3. Follow the on-screen instruction to install the driver.
4. The driver icon
will show at the right-bottom of the Windows system tray when the driver is loaded.
Pairing/connect button on the
bottom of the keyboard
Pairing/connect button
on top of the receiver
(With a LED indicator
under the pairing/
connect button)
Pairing/connect
button on the bottom
of the mouse
English
8193URF BTC QIG 3100506091 Version 1.1
英文
