Operator's Manual –
Balloon Buster
©
LAI GAMES
32
DART ALIGNMENT MODES
Balloon Buster
has three modes for dart alignment –
Auto Align
,
Manual Align
and
Check
.
Auto Align
-
run through all five target holes and automatically align the dart to each hole.
Manual Align
-
manually align the dart to each target hole, using the dart right, left, forward
and backwards buttons on the service panel.
Check -
automatically check the dart alignment of each target hole, and log an error if any of
the target holes are incorrectly aligned.
LAI Games
strongly recommends performing an alignment check every two weeks, when
prizes are reloaded, and when the machine is moved.
ATTACHING THE FOAM CAP
SHORTCUT TO AUTO ALIGN
Note: This is a fast simple method of quickly and regularly checking game alignment.
1.
From gameplay or Attract mode, press and hold the UP button on the player control
panel and press the red TEST button once, while still holding UP. The credit display
should now show
.
2.
Press the UP button on the player control panel – the credit display should now
show
. Attach the cap included to the front of the dart as shown above, then
press the UP button on the player console to run auto alignment.
3.
The game will start from Hole 1 and step through all holes to check if they are
aligned first, it will only align the holes that need to be aligned.
4.
During auto alignment, the credit display will read POS2 -
- where 2 is the
number of the target hole currently being aligned.
5.
Once the process is finished, the credit display will flash
to verify that
all targets have been aligned correctly. The cap can now be removed from the dart.
6.
Press the UP button once to exit and return to the attract mode.
Remember to
remove the cap before returning to the attract mode
.
AUTO ALIGNING THE DART
1.
From Attract mode, press the TEST button until you see
on the credit display,
then press the SERVICE button once. The credit display should now show
.
2.
Press the UP button on the player control panel – the credit display should now
show
. Attach the cap included to the front of the dart as shown above, then
press the UP button again to run the Auto Alignment setup.
3.
During auto alignment, the credit display will show POS2 -
- where 2 is the
number of the target hole currently being aligned.
To Purchase This Item, Please Visit : BMIGaming.com | Call Global Sales : + 561.391.7200 | USA / CA : (800) 746-2255