Operator's Manual –
Balloon Buster
©
LAI GAMES
16
ATTRACT MODE
The Attract mode provides a light and sound display, while the game is not being played.
This feature is to attract potential customers to play the game. The attract mode sound can
be turned on and off or adjusted for how often it is played
(refer to the programmable
adjustment page for instructions).
PLAY MODE
Balloon Buster
has two play modes. The Standard Coin Play mode, where a coin must be
inserted to play, and Free Play mode where no coins are necessary.
COIN PLAY
Coin Play mode is entered from Attract mode, by inserting coins in any of the two coin slots
on the front of the machine cabinet, then following the instructions in the “How to Play”
section of this manual.
FREE PLAY
Free Play mode is entered from Attract mode by holding the SERVICE button for longer than
five seconds
F
r
E E
will be displayed on the 4-digit LED display.
For a single free game, just press the SERVICE button once. When issuing single free games
in this manner, prizes can be won as normal.
TEST MODE
The
Balloon Buster
test mode has three test configurations that allow you to test the
functionality of the Sound, Light, Display, Game Switches and perform an operational test of
the Dart (refer to the test Mode Diagram below).
The test mode is also used for clearing Game Errors. If there is an active error, its error code
will be displayed. To try to clear the error code, press the red TEST button. The error can be
bypassed by quickly pressing the red TEST button again
* NOTE! *
Entering test Mode will clear any credits remaining in the game.
If during test mode no ADJUSTMENTS or actions are made to
the game for approximately four minutes, it will automatically
RETURN to Attract Mode.
To Purchase This Item, Please Visit : BMIGaming.com | Call Global Sales : + 561.391.7200 | USA / CA : (800) 746-2255
