laguna Fusion 3, Руководство пользователя

Страница: 34 / 81

Fusion 3 Table Saw \ Setup \ Rear Extension Table
34 © 2020 Laguna Tools
Rear Extension Table
The Fusion F3
table saw’s rear
extension table supports both the fence and the work piece. In conjunction with the rear rail,
the rear extension table provides an extra support table for the length of the wood piece being cut.
Quick Reference Guide
Add. Required Tools:

Level

General Wrench

17mm socket wrench (optional)
Troubleshooting/Tips:
For easiest assembly, flip the rear extension table so that the
face is down. After the table has been flipped, attach the rear
extension legs to the table.
Parts
REF Description Q Installation
Rear Extension Table 1 Rear Rail Assembly, F3 Table
Rear Extension Table Legs 2 Rear Extension Table
Hardware
REF Description Q Installation
C
Hex Cap Screw w/ Flat Washer
(longer)
3 of 5 Rear Extension Table, F3 Table
I
Hex Cap Bolt (51mm)
use with Nylon Lock Nuts(H)
4 of 4
Rear Extension Table Legs,
Rear Extension table
J
Nylon Lock Nuts (16mm)
4 of 4
Rear Extension Table Legs,
Rear Extension table
Attaching Legs to the Rear Extension Table:
1. Flip the rear extension table so that the face is down.
2. Place the rear extension legs between the metal L-brackets on either side of the table.
3. Align the rear extension
leg’s bolt
holes with
bracket’s bolt
holes. Ensure that the rear extension
leg’s bolt
holes are
aligned with the last two bolt holes of the metal bracket.