Laguna Tools Smartshop II Series, Руководство пользователя

Страница: 53 / 69

53
Maintenance.
As with any machine, to ensure optimal performance, you must conduct regular
maintenance.
Lubrication.
You must regularly (minimum every 12 hours) lubricate the bearing surfaces and
the ball screws. Use a thin Lithium spray or a 30wt oil lubricant. Spray daily and
wipe off the excess.
Daily checks.
1.
Clean the machine and lubricate unpainted surfaces
with a 30wt oil lubricant. Wipe off any excess and buff
with a dry polishing cloth. This will reduce the likelihood of
rust forming.
2. Check cutter teeth for chips and dullness.
3. Generally inspect the machine for damage and loose
or worn parts.
4. Collets and spindle collet holes must be cleaned
regularly. Ensure that the slots in the collets are free of
sawdust, as sawdust builds up and will stop the collet
compressing. If the collet or spindle holes are not clean,
the router bit may not run true, and this will affect the
performance of your machine.
Weekly checks.
1.
Clean the cutters.
2. Check cutter teeth for chips and dullness.
3. Generally inspect the machine for damage and loose or worn parts.
4. Check the dust extraction for blockages, as any large bits could cause
blockages.
5. Replace the water every week if your machine has a water-cooled spindle.
6. Rotate the water pipes every week, inlet to outlet and reverse for the other
pipe if your machine has a water-cooled spindle. This will clean out any dirt or
other debris that is accumulating inside the cooling system.
7. Check that all the electrical connectors are fitted correctly and are not loose.
8. Check that all the motor couplers are connected and that the screws are tight.
Position of home switches.
The home switches are activated by proximity
to steel items and can be tested by placing a screwdriver or something similar on
the activation face (top). When activated, an LED should light. If the LED does
not come on, the switch or wiring is faulty.
Collet fitted to
spindle nut