Laguna Tools Smartshop II Series, Руководство пользователя

Страница: 36 / 69

36
COORD’S screen.
1) (Machine Coords) is a drop-down menu to select which dimension set is
shown in the X, Y, Z, and A axis DROs. The displayed references are for
Machine Coordinates, Zero Point Offset (G54), and relative coordinates.
2) (RESET RELATIVE) is a built-in tape measure. By pressing the RESET
REATIVE button, you will zero the X- and Y-axis DRO under relative
coordinates display. You can then jog from there to get precise
measurement when needed. This function does not affect machine or zero
point offset locations.
3) (TEACH ZPO) Teach Zero Point Offset is used to set the work offsets the
program will reference during run (G54 is generally the front left corner of
the spoil board). Jog to the front left corner in X and Y and press the
(TEACH ZPO) button.
4) The next button will jump to the Export and Import settings screen.