Laguna Tools SMARTSHOP I MANUAL, Руководство пользователя

Страница: 41 / 50

Key pad Display
Cable interface USB interface
Connection port
USB printer cable port
Connection cable Hand held controller
Memory stick socket
9
Parts of the Hand-held Controller
The hand held controller has the
following parts.
Key Pad
This is used to input data into the HHC
and to select the various functions.
Display
This communicates with the operator.
Cable Interface
The main interface cable and USB
printer cable connect into these
sockets.
USB Socket
The USB socket is used to plug the
memory stick into for downloading
programs.
Assembling the Hand-held Controller
Note: Never use a memory stick
with a greater capacity than 8GB.
If you do it will crash your machine
computer. It is strongly suggested
that you purchase additional
memory sticks and mark them
CNC machine use only.
Fit the cable to the controller and
ensure that the screws are finger
tight. The USB printer cable port is
used to connect the controller
direct into your computer.
Note: The connection port socket
and plug only fit one way so
ensure that the plug is the correct
way up prior to assembling.