Laguna Tools MTP105, Руководство пользователя

Страница: 11 / 69

11
Introduction to the Pinnacle C1 lathe
This machine is designed to give you years of safe service. Read this owners manual
in its entirety before assembly or use.
General description
This lathe has been designed to give wood workers the option to customise the lathe
to meet their requirements. Or to add to the lathe as there needs change.
The lathe can be a centre lathe with bowl turning facility [up to 48” in diameter].
A copy lathe, spiral cutting lathe or all three depending on the option package that you
select. If you require a longer distance between centres various optional bed
extensions are available up to 100” [factory fitted option].
Identification.
There is a plate at the back of the machine listing all the manufacturing data including
the serial number, model, etc.
General construction
The lathe has been manufactured from cast iron and steel to give it a high mass that
both helps to absorb any vibration that is generated during the turning process and
insures that the machine is very stable. Each machine comes pre drilled for all the
options so that you can add them later should your needs change.
Headstock.
The head stock houses the motor and main spindle. The spindle has 4 sealed for life
bearings for maximum rigidity and taking the load exerted when turning up to 48”
blanks. The spindle can be locked in up to 24 positions for fluting and indexing work.
Tail stock.
The tail stock is cast iron construction and accepts attachments with a number 3 morse
taper mark 2
Bed of the lathe
The bed is a square tubular construction with a short section that can be removed
when turning bowls with a diameter of greater than 24” and less than 48”
Optional spiral gear holder